Table of Contents
Advertisement
Item
Title
1
Passive Act
2
Passive Act Tim-
ing
Auto-OFF (RX)
3
4
Remote Setting
Remote Control Systems
200, 400, and 500 Series
Remotes-0214
2721 NE 4th Ave Pompano FL 33064 | (954) 367-6116
Receiver Function Setting
Content
1. Relay OFF
2. POWER OFF
0.1
-4
seconds
1. None-Execute
2. 10 minutes~4 hours
POWER OFF
1. Enable
2. Disable
Description
Passive Act: The function of this item is used to
set the reaction of receiver when no command
signal is received from transmitter in certain time
(the default time is 0.5 seconds).
Relay OFF means the Main Relay is still
the other relays with the
de-energized. It is not necessary to re-commence
the procedure of
"POWER-ON"
operating.
POWER OFF means the Main Relay and all of
the other relays with the
by EMS" functions are going to de-energize and
it is essential to re-commence the procedures of
"POWER
ON" again to continue operation.
The duration working time of receiver between
passive act is activated and the power or relay is
really OFF.
Enable: When Transmit Mode is set for continu-
ous, it will send an EMS signal to
the receiver if it is set to auto off in a certain time-
frame.
Disable: Disable the function to send EMS signal
to receiver before the transmitter is off.
Enable:AIIow the receiver to do ID-Code remote
setting.
Disable: Not allow ID-Code remote setting on
receiver.
Visit WWW.ACIHOIST.COM for the most current information
"ON"
but
"NORMAL:'
function are all
again to continue
"NORMAL:'
and
"Control
"POWER-OFF"
PAGE: 15
Advertisement
Table of Contents
