Cleaner Maintenance; Changing The Agitator - Hoover FREEJET 3in1 FJ120R2 Instruction Manual

CLEANER MAINTENANCE

Emptying the Dust Container
Hold the unit over a bin and pull the bin empty trigger [2N] to instantly empty the dust container. [7]
Cleaning the Filters
1. Release the handheld unit from the main body of the cleaner.
2. Press the filter access button [2O] and remove the handle section from the dust container. [8]
Use the filter handle to remove the filter and filter screen from the dust container. [9]
3.
4. Wash the filter and screen in hand warm water. Once thoroughly dry return to the dust container.
5. Reassemble the handheld unit and return to the cleaner main body.
NOTE: Do not use hot water or detergents when cleaning the filters. In the unlikely event of the filters becoming damaged,
fit a genuine Hoover replacement. Do not try and use the product without a filter fitted.

Changing the agitator

Using a coin turn the lock to the open position. [10]
1.
2. Remove the agitator retainer.
3. Unloop the belt and lift the agitator out of the cleaner. [11]
4. Loop the belt aound the new agitator and return to its original position. Replace the agitator retainer and lock in place.
End of product Life Battery Disposal
If the cleaner is to be disposed of the batteries should be removed. Used batteries should be taken to a recycling station
and not disposed with household waste.
IMpORTaNT: Always fully discharge the batteries before removal.
1. Run the unit until the batteries run flat.
2. Release the handheld unit from the main body of the cleaner.
3. Press the filter access button and remove the handle section from the dust container.
4. Remove 6 screws and open the unit. [12]
5. Remove the motor/battery housing and disconnect the cables.
6. Remove the batteries from the housing.
NOTE: Should you experience any difficulties in dismantling the unit or for more detailed information about treatment,
recovery and recycling of this product, please contact your local city office, your household waste disposal service.
HOOVER SPARES AND CONSUMABLES
the cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to
remove DRY dirt and dust from household carpets, flooring and fabrics. This cleaner is not fit to be used as an industrial
cleaner, and is not designed for the collection of vitreous building material including particle board construction products
and similar products such as wood/fibres, cement, fillers, fibre glass etc or excessive or frequent sand. The infrequent
pick-up of these materials in these circumstances may be harmful to your cleaner and may void the manufacturer's
warranty.
Hoover spares and Consumables - 1300 360 845
Always replace parts with genuine Hoover spares. These are available from your local Hoover Floorcare dealer or direct
from Hoover Floorcare.
When ordering parts always quote your model number.
Consumables:
• pre motor Hepa fiLter
• aGitator
* Features vary according to model
s93 – 32200717
y24 – 33701705
6