Table of Contents
Advertisement
Setting The Cahnnel (ATV)
Choosing the Channel Type
Before your television can begin memorizing the available channels, you must specify the type of
signal source that is connected to the TV.(i.e., an antenna, a standard cable system)
1.
Press Menu/set button to display the
main OSD menu.
2.
Select the TV Main menu.
3.
Press Menu/Set to enter the sub
menu.
4.
Select Channel Type(ATV) or
Channel Type(DTV)
5.
Select the Channel Type(ATV) or
Channel Type(DTV) with
button and press Exit button. You Can
select Air or CABLE.
Storing the Channel Automatically
Press Menu/Set button to display the
main OSD menu
Select The TV main menu.
Press Menu/Set button to enter the
sub menu.
Select Auto Scan With
and press Menu/Set Button on the
remote control. Then the tuning bar
will appear and scanning will start.
(HDTV Scan)
* Analog Scan precedes Digital Scan on Auto Scan mode.
You can enter the TV menu and HDTV menu in TV mode only. (When you watch a TV programme.)
/
/
Button
28
(ATV Scan)
OWNER'S MANUAL
Advertisement
Table of Contents
