Contents Foreword ■ Caution ■ Precaution Overviewing your the Monitor ■ Viewing the Control Panel ■ Viewing the Connecting Panel ■ Viewing the Remote Control - Key Description - PIP (Picture In Picture) - Loading the Batteries Installation ■ Table Stand Installation ■...
Page 3
Contents Setting the Sound ■ Adjusting the Sound Balance ■ Changing the Sound Mode ■ Adjusting User Sound Mode ■ Spatial Effect ■ AVC (Auto Volume Control) ■ MTS (Multichannel Television Sound) ■ Digital Output (HDTV Mode Only) Setting the Others ■...
Caution CAUTION - TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. - DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - SHOCK HAZARD DO NOT OPEN. CAUTION These servicing instructions are for use by qualified service personnel only.
Precaution Always be careful when using your TV. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
Page 6
Precaution In case of the following cases, unplug the unit from the wall outlet and contact qualified service center. * When power supply code or plug is damaged * If liquid has been spilled on the unit or if alien objects have fallen into the unit. * If the monitor has been exposed to rain or water.
Page 7
Precaution Setting WARNING Provide ventilation for the Monitor. The unit When installing the Monitor on a table, is designed with slots in the cabinet for be careful not to place the edge of its ventilation to protect it from overheating. stand.
Page 8
Precaution POWER CAUTION Use only the accessory cord designed for this product to prevent shock. The power supply voltage rating of this product is AC100- 240V, the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.
Page 9
Precaution CAUTION Operation Upon completion of any service or Never add any attachments Do not place anything containing repairs to this Monitor, ask the and/or equipment without liquid on top of the Monitor. service technician to perform safety approval of the manufacturer. -This may cause a fire or could give checks to determine that the Monitor Such additions can increase the...
Page 10
Precaution Operation WARNING Put the batteries in right direction (+/-). Only use the specified batteries. DO not use new battery with old - Otherwise, it can make a fire, injury and -This make cause damaged the one. pollution caused by bursting of batteries. Monitor or could give an electric –...
Viewing the Control Panel OSD Key Position OSD Key Function INPUT SELECT VIDEO S-Video / AV, Select the signal source from multiple input sources such as TV, HDTV , VIDEO 1, COMPONENT1, COMPONENT2,PC , DVI and HDMI. VOL/CH ▲/▼ To change the CHANNEL ,press ▼button first and change the channel with ▲,▼buttons. To change the VOLUME ,press ▲button first and change the volume with ▲,▼buttons.
Viewing the Connecting Panel Back Panels and Jacks 1. DVI & D-Sub(PC) Sound 2. DVI 3. HDMI 4. RS-232C 5. D-Sub(PC) 6. Component1,2 7. Component Sound1,2 8. VIDEO 1 9. VIDEO OUTPUT2 10. VIDEO 2 11. SPDIF 12. Phone Jack (optical) 13.
Viewing the Remote Control Buton Description Stand By Turn the TV on and off. Mute Temporarily cut the sound and restore it. Pre PG Turn to the previous programme or exit OSD. V.Size Choose the screen form. 16:9 > 4:3 > Panorama > Zoom1 > Zoom2 FAVORITE (FAVOURITE) Tune to your next favorite programme.
Remote Control Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected. Mono > Stereo > SAP * You can select only available modes depending on the source. INFO Display the current information about time, screen form, source and MTS mode. PICTURE There are 4 picture modes.
Page 16
Viewing the Picture-in-Picture MOVE KEY : Move the position of PIP Left Up Right Up (Start) Left down Right Down SWAP KEY : Swap the sources of the main screen and PIP Window. MODE KEY : Change the PIP window mode. OFF→SMALL→LARGE→TWIN SMALL LARGE...
Controls Of The Remote Control Loading The Batteries Press on the cover and slide Load two AAA batteries, Close the cover until it clicks. in the direction of the arrow. taking care that the + and - ends face the correct direction.
Page 18
Monitor Installation Stand Installation OWNER'S MANUAL...
Page 19
Be sure monitor power is turned off before making any connections. Place the speakers in the position you want. Install the speaker wires on the monitor and speaker. Be sure to connect the positive "+" wire to the "+" input and the negative "-" wire to the "-"...
Watching TV Connection the TV Cable Connect the TV antenna cable to the TV input jack. Press INPUT button on the remote control and select TV or HD TV on OSD. Use CH+, CH- button or numeric key to change TV channel for your channel selection.
Watching VCR Connecting the VCR With S-Video Connect a S-Video cable to the S-Video jacks of the VCR and the TV. Connect L (White), R (Red) sound cable (composite) to the sound jacks of the VCR and the TV. With AV input Connect a composite cable to the AV video jacks of the VCR and the TV.
Watching DVD Connecting the DVD • Connect the three separate component video cables to the DVD player’s Y, Pb and Pr jacks and to the Component jacks on the TV. • Connect the audio cable to the DVD player’s audio L (White) and R (Red) jacks and to the L and R audio jacks beside the Component jacks on the TV.
Page 23
What is HDMI? -HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression. - “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels).The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel...
Page 24
Watching Set Top Box How to connect Connect Set Top Box video inputs to AV, COMPONENT, HDMI,PC or DVI jacks on the TV. Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs.. How to use Supported Signals Component1...
Page 25
Connecting The PC (D-Sub and DVI) Connecting a PC to the TV • Connect a PC (15pin) video cable between the Video Output port on the PC and the PC port on the TV. Pin Configuration Description • 15Pin Signal Cable Pin NO.
Basic Operation Turning the Monitor On And Off Press the Power key on the remote control. The TV will turn on and you will be ready to use its features. You can also use the Power key on the front panel. Select Source Press INPUT key on the remote control.
OSD Menu Structure • OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. • Press the Menu/Set button on the remote control to see the main OSD menu. EXAMPLE of OSD Menu part ◄...
Setting The Cahnnel (ATV) Choosing the Channel Type Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV.(i.e., an antenna, a standard cable system) Press Menu/set button to display the main OSD menu.
Page 30
CHANNEL (TV) Add/Del You can add or erase the current channel Press Menu/set button on the remote control to display the main OSD menu. Select the TV main menu with key on the remote control. Press Menu/Set button to enter the sub menu.
Page 31
CHANNEL (TV) Edit Favorite programme List You can store of your favorite channels for each available input source. Then, when you press the Favorite button on the remote control, Press Menu/Set button to display the main OSD Menu. Select the TV main menu. Press Menu/Set button to enter the TV Sub menu.
Page 32
CHANNEL (TV) Digest With the Digest function, you can select a TV prgoramme watching 16 programme at once. This function works in TV mode only. Press the DIGEST button on the remote control. . You can make off the Digest Function by pressing Digest button again.
Page 33
PICTURE Mode - Your TV has 3 automatic factory preset picture settings (“Standard”, “Sharp” and “Mild”). You can choose Standard, Vivid or Mild by pressing “Picture” key on the remote control (or by making a selection from the menu). Or you can select USER which automatically recalls your personalized picture settings.
Page 34
PICTURE Adjust USER Mode You can change the Contrast, Brightness, Color, Sharpness , and Tint according to personal preference in USER mode. (The function for Tint Adjustment is activated when NTSC signal is input.) Select the item to adjust Select USER mode (Previous page) with button.
Page 35
PICTURE Contrast Adjust brightness difference between bright part of the screen and dark part. Distinct ◀ ▶ Vague Brightness Adjust brightness of the screen. Dark ◀ ▶ Bright Color Adjust deep and light color of the screen. Decrease ◀ ▶ Increase Sharpness Adjust vividness of the screen.
Page 36
PICTURE Temperature - Your TV has 5 screen temperatures (color settings): Press Menu/set key to display the main OSD menu. Select the picture main menu. Press button the picture menu. Select Temperature and press Menu/Set to enter the under menu. Then the Picture-Temperature under menu appear.
Page 37
PICTURE Video NR (Noise Reduction) - This function automatically filters out and reduces the image noise and improves picture quality where receiving weak signals. Press Menu/Set button to display the main OSD menu. Select the picture main menu item. Press Menu/Set to enter the sub menu.
Page 38
PICTURE Screen Format Description 16 : 9 16:9 video: No change. 4:3 video: Expands 4:3 video signal horizontally to fit the 16 : 9 screen. Panorama 16:9 video: No change. 4:3 video: Expands 4:3 video horizontally to fit the 16 : 9 screen and to minimize distortion, sides are expanded more than center.
Page 39
PICTURE ( PC ) In PC mode, you can adjust the H,V-Position, Divide ,Native Mode and Phase. Also you can adjust them automatically. Geometry You can change H, V-Position, Divide and Phase in PC mode like usual PC monitors. You can also adjust them automatically.
Page 40
PICTURE ( PC ) H-POSITION ◀ ▶ V-POSITION ◀ ▶ PHASE Mismatch Match OWNER'S MANUAL...
Page 41
SOUND In SOUND Menu, you can adjust balance, MTS ( Multi-Track Sound), AVC (Auto Volume Control) and select the equalizer settings. Balance This control allows you to adjust the balance of the left and right speaker output. Press Menu/set button to display the main OSD menu.
Page 42
SOUND User Adjust You can use the OSD menu to change the Treble, Bass, Balance and DRC according to your preference. Select USER mode (Previous page) equalizer menu appear when you select USER mode. Select a gain bar with button on the remote control and adjust it with button.
Page 43
SOUND - Select sound signal format from the input source. There are Mono, Stereo, SAP sound formats. Press Menu/set button to display the main OSD menu. Select the SOUND main menu with button on the remote control. Press Menu/Set to enter the sub menu.
Page 44
SOUND Digital Output (HDTV Mode Only) - Use this menu to select Sound Type, PCM or Dolby Digital on SPDIF Output Mode. Press Menu/Set button to display the main OSD menu. Select the Sound main menu with button on the remote control Press Menu/Set to enter the sub menu...
Page 45
SET UP In SET UP menu, you can adjust the transparency of the OSD menu and set PIP and others. Translucent - Adjust the transparency of the OSD menu. There are 8 step from OFF to 7. Press Menu/set button to display the main OSD menu.
Page 46
SET UP Size in PIP ( Picture In Picture ) - Change the size of the PIP window. There are 3 sizes: SMALL, Large, Twin Select Size and press button . Adjust size function with & button and press Menu/Set button. SMALL LARGE TWIN...
Page 47
SET UP Picture Swap in PIP ( Picture In Picture ) - Swap the sources of the main screen and the PIP window. * Select Picture Swap and press Menu/Set button. Position in PIP - Change the position of the PIP window. Select Position with button on the remote control and press...
Page 48
SET UP V-Chip (TV Parental Guidelines) - Parental restrictions can be Setup using either of two methods: The TV guidelines or the MPAA rating Press Menu/Set button to display the main OSD menu. Select the Setup main menu with button on the remote control. Press Menu/Set button to enter the sub menu.
Page 49
SET UP TV Block in V-Chip - You can Setup restrictions using the “TV Parental Guidelines” of FCC. Select TV Block with button on the remote control and press Menu/Set button to enter the sub menu. Then the TV Block sub menu appear.
Page 50
SET UP Change Password in V-Chip Select Change Password with button on the remote control and press Menu/Set button to enter the sub menu. Then the Password change sub menu appear. Enter the new password with numeric buttons on the remote control. V-Chip Blocking in V-Chip Select V-Chip Blocking with button on...
Page 51
SET UP SET UP Advanced - You can set ID, Burn Protect, Blue Back, Language and Front Key Lock in Advanced Menu. Press Menu/set button to display the main OSD menu. Select the SETUP main menu with button on the remote control.
Page 52
SET UP Blue Back in Advanced You can set to display blue-color screen instead of noise screen. Select Blue Back menu. Then the cursor moves into the ◄► parts. Turn the function on or off with button and press EXIT button. Language in Advanced Set the language to use in OSD.
Page 53
SET UP Burn Protect in Advanced The monitor may be damaged from displaying a static image long time (over 30 minutes). It is called as image sticking, and burn protect function moves image regularly to relieve image sticking. You can set the moving range of burn protection function. ( How much the image will move.) Burn Protection function moves image 1 pixel per 2 minutes, and the set range, image starts to go back to the original position Select Burn Protect menu.
Page 54
SET UP HDTV Setup (HDTV mode) - Use this menu to set Time Zone and put Daylight Saving Time into effect. Press Menu/set button to display the main OSD menu. Select the SETUP main menu with button on the remote control.
Page 55
SET UP Daylight in HDTV Setup(HDTV mode) - Use this menu to adopt Daylight Saving Time. Select Daylight menu and press button to enter the ◄► parts. Then the cursor moves into the ◄► parts. Choose the Daylight with button and press EXIT button. OWNER'S MANUAL...
Page 56
SETUP HDCCD Setup(HDTV Mode Only) - Use this menu to select a font style, a font type, a text color, a back color, a edge type, a edge color and a display type of subtitles. Press Menu/set button to display the main OSD menu.
Page 57
TIME In the TIME menu, you can set the current time and auto power on / off. Time Set Set the current time. Press Menu/set button to display the main OSD menu. Select the TIME main menu. Press Menu/Set to enter the sub menu.
Page 58
TIME On Channel Set the channel when TV power turn on automatically. ** Available only when the Time is set and On Time is ON. Press Menu/set button to display the main OSD menu. Select the TIME main menu with button on the remote control.
Page 59
TIME Off Time This TV can be set to turn off automatically at specific times that you choose. Before using the timer, you must set the TV’s clock as described previously. Press Menu/set button to display the main OSD menu. Select the TIME main menu with button on the...
PICTURE MODE Contrast Standard Brightness Vivid Color Mild Sharpness Tint (Only For NTSC) User Recall WARM2, WARM1, NORMAL, COOL1, COOL2 TEMPERATURE COLOR ENHANCER COLOR ENHANCER ON/OFF VIDEO NR ON/OFF VIDEO NR 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3 SCREEN FORM BLACK ENHANCER BLACK ENHANCER ON/OFF SOUND STANDARD...
SET UP TRANSLUCENT SIZE OFF, SMALL, LARGE, TWIN SOURCE PICTURE SWAP POSITION RIGHT DOWN, RIGHT UP, LEFT UP, LEFT DOWN CAPTION CC1, CC2, TEXT 1, TEXT 2 V-CHIP TV BLOCK MOVIE BLOCK CHANGE PASSWORD V-CHIP BLOCKING V-CHIP BLOCKING ON/OFF ADVANCED SET ID 0~99 BLUE BACK...
Page 62
TIME TIME SET CHANNEL TYPE ON TIME ON/OFF ON TIME SELECTION ON CHANNEL ON VOLUME 1~100 OFF TIME ON/OFF OFF TIME OFF, 10, 20, 30, 60, 90, 120, 150, 180 Min SLEEP TIME CHANNEL TYPE(ATV CABLE CHANNEL TYPE(DTV) CABLE AUTO SCAN ADD/DEL FINE TUNE EDIT...
Page 63
PICTURE MODE Contrast Standard Brightness Vivid Color Mild Sharpness Tint (Only For NTSC) User Recall WARM2, WARM1, NORMAL, COOL1, COOL2 TEMPERATURE COLOR ENHANCER COLOR ENHANCER ON/OFF VIDEO NR ON/OFF VIDEO NR 16:9, PANORAMA, ZOOM1, ZOOM2, 4:3 SCREEN FORM BLACK ENHANCER BLACK ENHANCER ON/OFF SOUND STANDARD...
SET UP SIZE OFF, SMALL, LARGE, TWIN TRANSLUCENT SOURCE PICTURE SWAP RIGHT DOWN, RIGHT UP, POSITION LEFT UP, LEFT DOWN CAPTION CC1~4, TEXT 1~4, SERVICE1~6 V-CHIP TV BLOCK MOVIE BLOCK CHANGE PASSWORD V-CHIP BLOCKING V-CHIP BLOCKING ON/OFF ADVANCED SET ID 0~99 BLUE BACK BLUE BACK ON/OFF...
Page 65
PICTURE MODE Standard Vivid Mild User Contrast, Brightness, Color, Tint, Sharpness, Recall WARM2, WARM1, NORMAL, COOL1, COOL2 TEMPERATURE GEOMETRY H-POSITION V-POSITION DIVIDE PHASE NATIVE MOFE ON/OFF NATIVE MODE NATIVE H-SIZE AUTO ADJUST 16:9, 4:3 SCREEN FORM OWNER'S MANUAL...
Page 66
SOUND BALANCE SOUND MODE STANDARD MOVIE MUSIC NEWS USER 100Hz, 500Hz, 1.5KHz, 5KHz, 10KHz EQUALIZER (PRESS SET) SPATIAL EFFECT ON/OFF SPATIAL EFFECT AVC ON/OFF SET UP TRANSLUCENT SIZE OFF, SMALL, LARGE, TWIN SOURCE PICTURE SWAP POSITION RIGHT DOWN, RIGHT UP, LEFT UP, LEFT DOWN ADVANCED SET ID 0~99...
Page 67
TIME TIME SET CHANNEL TYPE ON TIME ON/OFF ON TIME SELECTION ON CHANNEL ON VOLUME 1~100 OFF TIME ON/OFF OFF TIME OFF, 10, 20, 30, 60, 90, 120, 150, 180 Min SLEEP TIME OWNER'S MANUAL...
Troubleshooting Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money. Problem Quick Action for Possible Solution No picture & No sound Check whether the Monitor is turned on. Power cord inserted into wall outlet? Plug another product’s power cord into the wall outlet where the Monitor’s power cord was plugged in.
Warranty Card 1-Year Limited Warranty Warranty Service is only available in the country of original purchase. This is an impor tant document. Attach your bill of sale to this card and keep it in a safe place.Your bill of sale is your warranty. Our warranty remains in effect for one year from the date of the first consumer purchase.