Harsper HP-5500V Owner's Manual page 19

Be sure monitor power is turned off before making any connections.
Place the speakers in the position you want. Install the speaker wires on the monitor and
speaker. Be sure to connect the positive "+" wire to the "+" input and the negative "-" wire
to the "-" input. Connect left monitor input to left speaker and right monitor input to right
speaker. Any extra speaker wire length remaining can be bunched into the wire holders
provided. (Caution: Once installed, the speaker wire holders lock into position and can't
be removed.)
• Always lift the monitor itself (not the speakers) when handling or moving the
monitor after speakers have been installed.
OWNER'S MANUAL
18