Daikin BYCQ140D7GW1 Installation Manual page 10

(6) Push up the suction grille slowly first, and while pressing the
two knobs, finally fit the grille into the panel securely.
Knobs
(2 points)
Suction grille
Note
The suction grille can catch the fall prevention cords while the
suction grill is closed.
Check that the fall prevention cords do not protrude from the
suction grille before closing the suction grille.
Suction grille
Fall prevention
cord
7-3 Hook (B)
(1) Set the suction grille to an angle of approximately 45° and put
the hooks (in three points) onto the panel.
Panel
Suction
grille
Suction grille
mounting angle
Panel
Suction grille
(2) As shown in the illustration, hook the fall prevention cords for
the suction grille to the corner clasps (on two corners).
Change the directions of the
fall prevention cords.
Fall prevention cord
Clasp
Installation manual
9
Panel
Must not protrude
Display on
SUCTION GRILLE HOOKING SIDE
Suction grille
Bend the
Clasp
clasp inward.
Fall prevention cord
(3) Connect the flexible hose (accessory (2)) onto the panel side.
(The flexible hose (accessory (2)) has no directionality
constraint.)
Flexible hose
(accessory (2))
Flexible hose junction
on the panel side
Hooks
(2 points)
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
(4) Press fit the flexible hose connected in (3) into the panel.
Pay attention so that the hose will not be caught by the suction
grille closed.
(5) Connect the opposite end of the flexible hose connected in (3)
onto the suction grille side.
* Rotate the flexible hose joint on the suction grille side
according to the mounting direction of the suction grille as
shown in the illustration.
Flexible hose joint on
the suction grille side
Note
Check that the claws are engaged securely. Otherwise, a dust
collection failure may result.
(6) Push up the suction grille slowly first, and while pressing the
two knobs, finally fit the grille into the panel securely.
Panel
Suction grille
BYCQ140D7GW1 + BYCQ140D7GFW1
Flexible hose junction
on the panel side
Fit the claws into the
hooks (in two points)
securely.
To suction grille
Flexible
hose
Press fit the
flexible hose
along the shape
of the corner.
Flexible hose
joint on the
suction grille side
Flexible hose
Connect the
hose securely.
Knobs
(2 points)
Self cleaning decoration panel
4P310441-1C – 2017.05