Foundation for Installation
• Check the strength and level of the installation ground so that the unit will not cause any
operating vibration or noise after installation.
• Fix the unit securely by means of the foundation bolts. (Prepare 4sets of M12 foundation
bolts, nuts and washers each which are available on the market.)
• It is best to screw in the foundation bolts until their length are 20mm from the foundation
surface.
H-Beam
Spring washer
Concrete
Frame
Nut
Foundation bolt executing method
950
614
Anti-vibration
materials
Four bolt are
required
base
3 thread ridges
Installation
165
[Unit:mm]
Installation Manual 13