1. Manuals
  2. Brands
  3. Lutool Manuals
  4. Power Tool
  5. LT3IN1
  6. Instruction manual

Lutool LT3IN1 Instruction Manual

12v li-ion power tool set
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
12V LI-ION Power Tool Set
LT3IN1
Instruction Manual
Warning: Please make certain that the person intended to use this
equipment carefully reads and understands these instructions before
starting opertions.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LT3IN1 and is the answer not in the manual?

Questions and answers

Related Manuals for Lutool LT3IN1

Summary of Contents for Lutool LT3IN1

  • Page 1 12V LI-ION Power Tool Set LT3IN1 Instruction Manual Warning: Please make certain that the person intended to use this equipment carefully reads and understands these instructions before starting opertions.
  • Page 2 Product components: Fig. A: Cordless Drill...
  • Page 3 Fig. B: Cordless Multi Purpose Saw...
  • Page 4 Fig. C: Cordless Multi Function Tool...

  • Page 5: Table Of Contents

    CONTENTS APPLICATION .................. 6 DESCRIPTION (FIG A-B-C).............. 6 PACKAGE CONTENT LIST .............. 7 SYMBOLS ..................7 GENERAL POWER TOOL SAFETY WARNINGS ......8 ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS ..................10 ADDITIONAL SAFETY INSTRUCTIONS FOR CORDLESS DRILLS ......................11 ADDITIONAL SAFETY INSTRUCTIONS FOR THE CORDLESS MULTI PURPOSE SAWS ...............

  • Page 6: Application

    LI-ION POWER TOOL SET 12V APPLICATION This set comes with 3 tools : A Cordless Drill , a Multi Purpose Saw and a Multi Function Tool . Cordless Drill : The machine is intended to drill holes in wood, bricks or metal (when drilling in steel, keep the machine in low speed to improve the drilling efficiency).

  • Page 7: Package Content List

    PACKAGE CONTENT LIST  Remove all packaging materials.  Check that the package contents are complete.  Check the appliance, the power cord, the power plug and all accessories for transportation damage.  Keep the packing materials as far as possible until the end of the warranty period. Dispose of it into your local waste disposal system afterwards.

  • Page 8: General Power Tool Safety Warnings

    GENERAL POWER TOOL SAFETY WARNINGS WARNING：Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference! The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.
  • Page 9 Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.

  • Page 10: Additional Safety Instructions For Batteries And Chargers

    ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS Batteries  Never attempt to open for any reason.  Do not store in locations where the temperature may exceed 40 °C.  Charge only at ambient temperatures between 4 °C and 40 °C. ...

  • Page 11: Additional Safety Instructions For Cordless Drills

    ADDITIONAL SAFETY INSTRUCTIONS FOR CORDLESS DRILLS Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live”...

  • Page 12: Additional Safety Instructions For The Cordless Multi Function Tool

     Do not touch the blade or metal filings until they have cooled. ADDITIONAL SAFETY INSTRUCTIONS FOR THE CORDLESS MULTI FUNCTION TOOL Risk of injury !  Only use an undamaged plug and cable of charger.  Do not treat any materials that produce any particles that are detrimental to health (e.g. asbestos).

  • Page 13: General Charging Information (Applicable For All 3 Cordless Tool Batteries)

    GENERAL CHARGING INFORMATION (APPLICABLE FOR ALL 3 CORDLESS TOOL BATTERIES) 10.1 Charging the battery pack (Fig. 3) Fig. 3 Red LED light Green LED light Charger The battery pack for this tool has been shipped in a low charge condition to prevent any possible problems.

  • Page 14: Operation Information Specific For The Cordless Drill

    When the battery is loaded, the red light (b) extinguishes and green light illuminates until the charger disconnect from the mains. NOTE: If the battery does not fit properly, disconnect it and confirm that the battery pack is the correct model for this charger as shown on the specification chart.
  • Page 15 11.2 Insertion/ removal of the battery (Fig. 4) Fig. 4 WARNING: Before making any adjustments ensure the drill is switched off with the forward/reverse selector (4) in the centre position. Align the raised rib inside tool with groove on the battery pack (6). Make sure the latches (7) on each side of the battery pack snap into place and the battery pack is secured in the tool before beginning operation.
  • Page 16 11.4 Switching ON/OFF (Fig. 6 and 7) Fig 7 Fig 6 The cordless drill starts and stops by depressing and releasing the ON/OFF switch trigger (5). This cordless drill is equipped with an electric brake, when the ON/OFF switch is released completely the chuck stops immediately.
  • Page 17 11.4.3 Variable speed This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression. 11.5 LED battery indicators. There are 3 LED battery indicators (8) positioned above the ON/OFF switch trigger.
  • Page 18 11.7 Adjusting the torque The torque is adjusted by rotating the torque setting (2), the torque is greater when the torque setting is set on a higher position. The torque is less when the torque setting is set on a low position“1”denote lowest and “...
  • Page 19 11.9 Drilling Before drilling, the torque setting should be set on drill position “ ”. When drilling hard smooth surface, use a centre punch to mark the desired hole location. This will prevent the drill bit from slipping off centre as the hole is started. Hold the tool firmly and place the tip of the drill or bit into the work piece, applying only enough pressure to keep the bit cutting.

  • Page 20: Operation Information Specific For The Multi Purpose Saw

    OPERATION INFORMATION SPECIFIC FOR THE MULTI PURPOSE SAW 12.1 Installing/replacement of the blade. Warning: Always remove the battery pack before making any adjustment or attaching any accessories. Select the saw blade best suitable for your application. Wood blades have a coarser tooth pitch; metal blades have a finer tooth pitch.
  • Page 21 NOTE: Remove the saw blade in the opposite way. Warning: Before installing the battery pack with this tool, always carefully pull on the blade to make sure it is securely locked in the saw clamping holder. Failure to do so may result in serious injury.
  • Page 22 12.5 Convert from Jig saw to Reciprocating saw (or visa versa) Hold the soft grip handle firmly, use your thumb or fingers to push the button (3) and keep it held. Rotate the movable saw head to 0-90 degree range as shown in Fig. 15 . The movable saw head can be locked in two positions: 0 degree and 90 degree.
  • Page 23 Metal cutting Blades specifically designated for cutting metals must be used for this purpose. You may use light oil as a coolant when cutting metal, this will prevent overheating of the blade, help the blade cut faster, and promote longer blade life. 12.7 Function of the jig saw Sawing wood...

  • Page 24: Operation Information Specific For The Multi Function (Oscillating) Tool

    OPERATION INFORMATION SPECIFIC FOR THE MULTI FUNCTION (OSCILLATING) TOOL 13.1 To install or remove the battery pack.(Fig. 16) Fig. 16 Turn the ON/OFF switch button of this tool to its “OFF” position. To install, slide the battery pack into the battery port. Make sure the latches on each side of the battery pack snap into place and battery pack is secured in the tool before beginning operation.
  • Page 25 13.4 Mounting an accessory (tool) Risk of injury ! To prevent switching the tool on unintentionally, remove the battery pack from the battery port of this tool before changing the tool. 13.4.1 Mounting the sanding plate (Fig. 19) Note: The sanding plate is fixed firmly to the Multi Function Tool and can not rotate due to the four locating pins on the output spindle.
  • Page 26 Fig. 20 WARNING! When mounting the sanding plate, cut saw blade, scraper, or segment saw blade, make sure it fits correctly on the collar of the tool holding fixture and has a clean supporting surface. 13.4.3 Attaching / replacing the sand paper (Fig. 21) With fast hook/loop fixation This sanding plate is an equipped with a hook and loop rubber backing pad.
  • Page 27 13.5 Adjusting the speed (Fig. 22) Before beginning, adjust the speed control according to the application. For example, we recommend a higher speed for work with the scraper. Conduct a test run in order to find a suitable speed. The speed controller (6) can be set at 6 positions. The “1”- position indicates the lowest speed and the “6”-position indicates the highest speed.
  • Page 28 Always guide the Cut saw blade along the cutting line without exerting any pressure. When plunging and sawing with a slight pendulum motion, make sure that sufficient chip removal is provided for. Keep a certain distance away from hard metals (stone/metal) (approx.

  • Page 29: Cleaning And Maintenance

    Regularly blow out the motor space from outside with dry compressed air.  Tool service and maintain must be performed only by qualified repair personnel. TECHNICAL DETAILS Model nr. LT3IN1 General tool data (applicable for each listed tool) Charger IFC-HT22V-12 Rated input 220-240V~ 50/60Hz, 16W Rated output 12.6V, 1A...

  • Page 30: Noise

    NOISE Noise emission values measured according to relevant standard. (K=3dB(A)) Cordless Cordless Cordless drill Multipurpose saw Multipurpose tool Acoustic pressure level LpA 78 dB(A) 74 dB(A) 84 dB(A) Acoustic power level LwA 89 dB(A) 85 dB(A) 95 dB(A) ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).

Table of Contents