Yamaha RX-SL80 Service Manual page 14

RX-SL80
SELF DIAGNOSIS FUNCTION (DIAG)／
There are 15 DIAG menu items, each of which has sub-
menu items. Listed in the table below are menu items and
sub-menu items.
No DIAG menu
1 DSP THR
2 BYPASS
3 RAM THR
4 PRO LOGIC/NEO6
5 SPEAKERS SET
6 EXT-INPUT
(Not applied to this model)
7 MIC CHECK (Not applied to this model)
8 STRAIGHT DISPLAY CHECK
9 MANUAL TEST
10 FACTORY PRESET
11 AD DATA CHECK/FAN TEST
12 FAN TEST
13 IF STATUS
14
自己診断機能 （ダイアグ）
ダイアグメニューは15個あり、そのそれぞれにサブメニューがあ
ります。下表はメニュー一覧です。
Sub-menu
1. YSS MARGIN
2. FULL BIT
1. ANALOG BYPASS
2. DSP BYPASS
1. RAM MARGIN
2. RAM FULL BIT
1. Pro Logic I
2. Pro Logic II
3. NEO:6
1. FRONT : SMALL 0dB
2. CENTER : NONE
3. LFE/B : FRNT
4. Pres Mix : 5ch
5. Front GAIN 1
6. Front GAIN 2
7. Tone Con Flat
8. Tone Con +10dB
9. Tone Con -10dB
1. 6CH_INPUT_6
2. 6CH_INPUT_8
1. MIC CHECK – – dB
1. STRAIGHT (Initial display / 初期表示)
2. VFD DISP OFF/OSD OFF
3. VFD DISP ALL/OSD Character pattern
4. VFD DIMMER/OSD Character pattern
5. CHECK PATTERN/OSD Character pattern
1. TEST ALL
2. TEST FRONT L
3. TEST CENTER
4. TEST FRONT R
5. TEST SURROUND R
6. TEST SURROUND L
7. TEST LFE
1. PRESET INHI (memory initialization inhibited / メモリーの初期化禁止)
2. PRESET RSRV (memory initialized / メモリーの初期化)
1. PRD/PRV
2. THM/FAN OUT
3. REC OUT (Not applied to this model)
4. IMP SW/POWER LIMITER DISP (Not applied to this model)
5. PANEL KEY
1. HIGH
2. MID
3. LOW
1. INSIDE STATUS 1 (5 Byte)
2. INSIDE STATUS 2 (3 Byte)
3. CHANNEL STATUS 1 (5 Byte)