Orton Sentry Xpress 4.0 Manual page 20

Shorthand Instructions
These instructions may be confusing until you have read more detailed instructions on Cone-Fire, page 6, or Ramp-Hold,
page 8. Read the safety guidelines, page 2. After pressing the keys in the left column, the message in the center will appear.
Keys to Press
(Not Down Arrow)
Keys to Press
(Not Down Arrow)
First segment not needed: enter a rate of 0000.
20 Cone-Fire / Ramp-Hold
Select cone number
Select speed
Enter Hold Time
Enter Segment 1 rate
Enter Temperature
Enter Hold Time
Cone-Fire
Display
Select COnE
/
/
(Sample speed)
(Or hold time)
The kiln is now firing.
Ramp-Hold
Display
Select Program #1, 2, 3, or 4
(Sample rate)
or
(Sample temperature)
(Or hold time)
The kiln is now firing.
-
(Last cone fired)
(Sample cone)
-