Gemtek Systems WRTR-262GN User Manual page 6

2. Unplug the LAN cable which connects your computer and modem
modem
3. Plug one end of the LAN cable into your modem and the other side to the Internet port of
WRTR-262GN. Turn on your modem.
modem
connect
4. Connect your computer to one of WRTR-262GB's LAN ports with the Ethernet cable.
Turn on WRTR-262GN, wait one minute, and then turn on your computer.
power outlet
5. Confirm the devices are connected correctly as the below diagram shows
computer
modem
turn off the computer
disconnect
connect
Internet port
WRTR-262GN
connect connect to PC
Ethernet cable
connect the power supply
disconnect
.