Gemtek Systems WRTR-262GN User Manual page 3

DIAG LED (Red) This indicates the status of the unit depending on the number of blinks per
cycle.
Note: When the unit is first turned on or restarted, the Diag LED will blink for almost a minute during
boot. This is normal.
Internet LAN 1-4 LED (Green)
On: functionality is enabled
Off: functionality is disabled
WIRELESS LED (Green)
Indicates wireless LAN status.
Blinking: Wireless LAN is transmitting
On: Wireless LAN is connected but not active
SECURITY LED (Amber) Indicates security status.
Off: Encryption is not set
On: Encryption has been set
POWER LED (Green)
On: The AC adapter is connected
Off: The AC adapter is not connected
Back Panel