Configuring The Ipv6 Ssm Group Range - HPE FlexFabric 5800 Series Configuration Manual

Step
Enable IPv6 PIM-SM.
4.
Enabling IPv6 PIM-SM in a VPN instance
Step
Enter system view.
1.
Create a VPN instance and
2.
enter VPN instance view.
Configure an RD for the VPN
3.
instance.
Enable IPv6 multicast
4.
routing.
Enter interface view.
5.
Bind the interface with a VPN
6.
instance.
Enable IPv6 PIM-SM.
7.
For more information about the ip vpn-instance, route-distinguisher, and ip binding
vpn-instance commands, see MPLS Command Reference.

Configuring the IPv6 SSM group range

Whether the IPv6 PIM-SSM model or the IPv6 PIM-SM model delivers the information from an IPv6
multicast source depends on whether the group address in the (S, G) packet that the receivers
request falls into the IPv6 SSM group range. All IPv6 PIM-SM-enabled interfaces assume the IPv6
PIM-SSM model for IPv6 multicast groups within this address range.
Configuration guidelines
•
Perform the following configuration on all routers in the IPv6 PIM-SSM domain.
•
Make sure that the same IPv6 SSM group range is configured on all routers in the entire domain.
Otherwise, IPv6 multicast data cannot be delivered through the IPv6 SSM model.
•
When a member of an IPv6 multicast group in the IPv6 SSM group range sends an MLDv1
report message, the device does not trigger a (*, G) join.
Configuration procedure
To configure the IPv6 SSM group range:
Step
Enter system view.
1.
Enter public network IPv6
2.
PIM view or VPN instance
IPv6 PIM view.
Configure the IPv6 SSM
3.
group range.
Command
pim ipv6 sm
Command
system-view
ip vpn-instance
vpn-instance-name
route-distinguisher
route-distinguisher
multicast ipv6 routing-enable
interface interface-type
interface-number
ip binding vpn-instance
vpn-instance-name
pim ipv6 sm
Command
system-view
pim ipv6 [ vpn-instance
vpn-instance-name ]
ssm-policy acl6-number
439
Remarks
Disabled by default.
Remarks
N/A
N/A
No RD is configured by default.
Disabled by default.
N/A
By default, an interface belongs to
the public network, and it is not
bound with any VPN instance.
Disabled by default.
Remarks
N/A
N/A
Optional.
FF3x::/32 by default, here "x"
refers to any legal group scope.