Sound - Philips 40PFL4701 User Manual

Sound

B B efore you begin:
You must set Location to Home.
Otherwise, personalized Picture and Sound settings will not be memorized
after the Unit goes into Standby Mode.
1
Press and use to select Sound, then press OK.
Picture Auto sound
Sound Equalizer
Setup Sonic Emotion
Features Auto volume leveling
Language TV speakers
USB Digital output format
Primary MTS
Digital audio preferences
2
Use to Select the item you want to adjust, then press OK.
to select the desired setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Music or
News)
Auto sound When you adjust the following settings (Equalizer,
Sonic Emotion or Auto volume leveling), Personal
sound will be set Automatically when Location is set
to Home.
Adjust the tonal quality for each frequency.
Cursor
Equalizer
to adjust each level of tonal quality.
Press BACK to go back to the previous menu.
This selects Sound Modes for more spatial or Surround Sound reproduction.
Off
Sonic Emotion
On
This function keeps a constant loudness level between the TV commercials
and the Programs.
Off
Auto volume leveling
On
You can select the Audio Output from the Unit's speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI cable
to this Unit, some sound operations such as volume up can be changed by
using this Unit's Remote Control.
On
Off
TV speakers
Speakers
EasyLink
p. 30
Standard
On
Off
On
Bitstream
Stereo
Cursor
to set Sonic Emotion to Off
to set Sonic Emotion to On
to Remove the Auto volume leveling
to Reduce Volume Differences
between the TV Commercials and
the Programs
to Output Sound from the Unit's
Speakers
No Output Sound from the Unit's
Speakers
to Control Audio Output from your
connected EasyLink Compliant
Devices with VOL + / – by using this
Unit's Remote Control.
You can select Audio Output through a Digital Audio Output connector.
Bitstream
Digital output format
PCM
You can set the Output mode as a default for the Sound mode (Analog TV
only).
This setting is not interlocked when you change the Output mode by pressing
SAP. Refer to Switching Audio Mode.
Stereo
Primary MTS Mono
SAP
You can set the interpretive broadcasting by an audio explanation.
Accessibility
Digital audio
preferences Audio
language
Primary
audio
selection
criteria
23
to Output Audio in its native format as
Bitstream to connected Audio
receiver.
to Output PCM format
p. 18
to Output Stereo Audio
to Output Mono Audio
to Output Second Audio Program
to prioritize VI-Visually Impaired
Streaming or HI-Hearing Impaired
Streaming: The setting for
Handicapped users (Main audio,
Visually Impaired or Hearing
Impaired).
to set your Preferred language in the
Audio Streaming (English, Spanish or
French).
to set TV Priority based on either of
the above Settings: (Accessibility or
Audio language).
Continued on next page.
.
English