Advertisement
Insert the correct Software and Flex File then make reset 572#
Check MYLAR contacts, C520 and C521;
If Ok Check Pull_Up resistor, CR904, VR903-6 and U800
Insert the correct Software and Flex File then make reset
Check U800 NOTE1 or Faulty and U701 NOTE1.
Check J900 Mic_Conn., U900 and relative
START
Put the phone in
Test mode and digit
Is there 2,7Volt on
pin1 of U501 ?
Check U501 (there must be
about 1,3Volt on pin4) and
vibrator contacts.
mercoledì, gennaio 24, 2001
GPRS Tri Band T260 Level 3 procedure
If it still NOT Work correctly
NOTE1 or Faulty.
572#
If it still NOT Work correctly
components NOTE1 or Faulty.
NO
1590#
YES
NOTE1 : check if any components mentioned are
correctly positioned , have not dry joint and aren't
not phisically damaged .
- MOTOROLA Level3 Authorized -
NO VOICE FEATURES
INTERNAL (HEADSET OK)
Check U800
NOTE1 or Faulty
Rev.1
T260:
NO KEYPAD
T260:
T260:
NO MICROPHONE
T260:
NO
VIBRACALL
pag.23
Advertisement
