Remove Pre-Tension Pack; Remove Lock Collar From Cam - Bowflex Revolution Revolution XP Service Manual

Replace Cam Assembly (continued)

7. Remove Pre-Tension Pack.

7-1. Use a 3/32"allen wrench to remove the six allen bolts
from the Pre-Tension Pack. ( Figure A )
7-2. Remove the Pre-Tension Pack. ( Figure B )

8. Remove Lock Collar From Cam.

8-1. Use a flat head screwdriver to pry up the bottom
tab on the Lock Collar. ( Figure A / Detail A )
8-2. Remove the Lock Collar from Cam. ( Figure B )
Cam
18
Maintenance Procedures
Figure A
Figure A
Cam Assembly
Pre-Tension Pack
Detail A
Figure B
Lock Collar
Figure B