Propulsion System Technical Information - Master Spas MP Force Owner's Manual

Swim Spa Propulsion System
Technical Information
CRITICAL REPLACEMENT COMPONENT PART NUMBERS:
WARNING: Items listed below shall only be replaced with identical components unless approved
by Master Spas Engineering Department. Any change or alteration to the system components will
cause a safety hazard and void the safety certification.
• Propulsion suction grate assembly: X804490
• Propulsion grate fasteners (4 per grate): X717900
• Propeller
- Wave ..................X400125
- Wave XP ............X400820
- Wave XP PRO .....X400820
• *Max. Frequency
- Wave ..................66Hz.
- Wave XP ............60Hz.
- Wave XP PRO .....68Hz.
*This is the certified maximum frequency. Actual frequency setting may vary.
PROPULSION SUCTION GRATES MISC. SPECIFICATIONS:
• Wall mount only
• Life span 7 years
• Tools required – No. 2 Phillips screwdriver
• Pulley system shall be 1:1 ratio only
Note: Fittings and fasteners should be observed for damage or tampering before each use of the
swim spa.
DO NOT DIVE. 70
MasterSpaParts.com