NETGEAR ProSafe WG302 Reference Manual page 64
802.11g wireless access
point
Hide thumbs
Also See for ProSafe WG302:
- Reference manual (128 pages) ,
- Configuration (3 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG302
The following list provides information about how to configure DHCP settings.
•
Use AP as DHCP Server: You may turn on this option and the Access Point will function as a
DHCP Server for Wireless Clients only. The Access Point will provide the pre-configured
TCP/IP configurations for all wireless stations connected to this Access Point.
There are two options available for managing the wireless clients:
— Accept DHCP Enabled Wireless Clients Only: The Access Point can only provide the
TCP/IP configurations to those wireless clients with the DHCP enabled.
— Accept Both DHCP Enabled and Static IP Configured Wireless Clients: The Access
Point will support wireless clients with the DHCP enabled and the static IP configured.
If you use the AP as a DHCP server, you must configure the following TCP/IP configurations for
using Access Point as a DHCP Server for Wireless Clients.
•
Starting IP Address: Type the starting IP address can be assigned from the DHCP server on
this Access Point.
•
Ending IP Address: Type the Ending IP address can be assigned from the DHCP server on
this Access Point
•
Subnet Mask: The Access Point will assign the specified subnet mask to the connected
wireless stations.
•
Gateway Address: The Access Point will assign this IP address as the default gateway for any
traffic beyond the local network.
•
Primary DNS Server: The Access Point will assign this IP address as the primary Domain
Name Server used by the connected wireless stations.
•
Secondary DNS Server: The Access Point will assign this IP address as the secondary
Domain Name Server used by the connected wireless stations.
•
Primary WINS Server: The Access Point will assign this IP address as the primary WINS
Server used by the connected wireless stations.
•
Secondary WINS Server: The Access Point will assign this IP address as the secondary
WINS Server used by the connected wireless stations.
•
Lease: The lease time for the IP address assigned. The wireless client user is required to renew
the IP address as soon as the lease is expired.
5-2
v0.1, December 2005
Advanced Configuration
Advertisement
Table of Contents
