Surface Elements and Reflector Bowls
Removing
Burn and Electrical
Shock Hazard
Make sure all surface
elements
are OFF before
removing
surface
elements
and reflector
bowls.
Failure to do so can result in burns or electrical
1.
Turn off alI surface elements.
1. Pull the surface element
straight
away
from the receptacle.
2. Lift the edge
of the element
opposite
the receptacle,
just
enough
to clear the element
hold
down clip and the reflector
bowl.
4. Lift out the reflector
bowl. See
"Cleaning
Charl" on page
22 for
cleaning
instructions.
16