Disabling Parental Control Temporarily For A Single Blocked Channel19; Changing Your Blocking Pin - Pioneer BR360 Getting Started

Disabling parental control temporarily for
a single blocked channel
To disable parental control temporarily for
a single blocked channel
1
Tune to the blocked channel you want to
watch. A black screen indicates the channel
has been blocked from viewing due to a
channel block.
If this channel is blocked due to a rating
or time block, you cannot disable parental
control for this channel only; you must
disable it for all channels, ratings, and times.
2
Press the SETTINGS button on the remote.
The Quick Settings menu displays.
3
Press the up and down browse arrow
buttons on the remote to highlight the Activate
Parental Control option.
4
Press the right browse arrow button to change
the setting from YES to NO.
The following message appears:
5
Press the A button to disable the current
channel only. A message appears asking you
to enter your blocking PIN.
6
Press the number buttons on the remote to
enter the four numbers of your blocking PIN. A
message indicates that the channel has been
temporarily unblocked.
Using Parental Control – Changing your blocking PIN
7
Press the A button accept the message.
The message disappears and the channel
now shows the program. Parental control
stays active for all the other blocked
channels, ratings, and times.

Changing your blocking PIN

To change your blocking PIN
1
On the remote, press the SETTINGS button.
The Quick Settings menu appears.
2
Press the A button. The General Settings
menu appears.
Please note that the BLOCKING PIN (Personal
Identification Number) on your digital terminal
has been pre-set to 0000.
3
Press the up or down arrow button to
highlight the blocking PIN option.
4
In the State Column, check if the blocking
PIN is enabled. If it is, go to step 10. If it is
disabled, go to the next step.
5
To enable the blocking PIN, press the right
arrow button to move to the State column.
19