Subscribe to Our Youtube Channel
Related Manuals for Amina APU-RS8i
Summary of Contents for Amina APU-RS8i
-
Page 1: Installation Guide
Installation guide APU-RS8i APU-RS8iC 19” Rack Mount, 1U, Multi-channel Loudspeaker APU-RS16i Protection Unit APU-RS16iC... -
Page 3: Table Of Contents
Index Caution: Read before installing these products ..4 Introduction ..................4 Compatibility ................4 Speaker settings .................5 Check model numbers ............5 Cautions when changing speaker settings ....5 Speaker settings .................6 Changing settings ..............6 Recording settings ..............6 Connection ..................7 Connection cautions ............7 Wiring diagram .............. -
Page 4: Caution: Read Before Installing These Products
Caution: Read Introduction before installing Compatibility these products The APU-RS8i and APU-RS16i has been designed specifically to enhance the sound and reliability of Mobius Series • To ensure optimal performance, and iQ Series loudspeakers. please read this guide carefully. Keep it in a safe place for future reference. -
Page 5: Speaker Settings
Check model numbers Cautions when changing speaker settings The APU-RSi are compatible with four groups of Amina speaker models, and Ensure that each channel is the APU-RSiC are compatible with two correctly set to match the groups. These are shown in the table connected speaker before use. -
Page 6: Speaker Settings
CHANNEL FUSE SETTINGS: CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16 Group 1 Group 3 x x x x Group 5 Group 7 Serial No. 16 Channel Protection Unit APU-RS16iC Amina Technologies Ltd Huntingdon, Cambridgeshire, PE29 7DL. Made in the U.K. -
Page 7: Connection
Connection Connection cautions Wiring diagram • NEVER connect more than one The diagram below shows an example of loudspeaker to an output channel. the wiring for channels 1 and 2. • It is not recommended to connect Each channel of the amplifier is wired amplifiers with power outputs that to the ‘AMP’... -
Page 8: Wiring The Speaker Connectors
Connection Wiring the speaker connectors Fitting the connectors • Each connector can now be fitted by The speaker connectors are supplied pressing it into the opening on the packed separately with the APU-RSi(C) back of the APU-RSi(C). to simplify the fitting of cables from each amplifier and speaker channel. -
Page 9: Positioning
Positioning Operation Front panel mounting Cautions in use The APU-RSi(C) is designed to fit into a It is not recommended that you standard 19 inch equipment rack via 4 intentionally cause the APU-RSi(C) to mounting holes in the front panel and automatically protect the loudspeakers has a height of 1U (45mm/1 inches). -
Page 10: Troubleshooting
Warranty The APU-RSi and APU-RSiC are designed to operate reliably for many years. Correctly installed and operated in accordance with these instructions, Amina warranties the APU-RS against defective materials and workmanship for a period of ten years. - Page 12 Amina Technologies Ltd Cirrus House, Glebe Road Huntingdon, Cambs, PE29 7DL England T: +44 (0)1480 354390 W: www.aminasound.com / E: info@aminasound.com Copyright 2017 APU-RSi V1.2...
Need help?
Do you have a question about the APU-RS8i and is the answer not in the manual?
Questions and answers