Table of Contents
Advertisement
1. Quick Start Guide
The RDK-12GCONV is designed to function out of the box. The following steps go
through the Initial Setup using the RDK-12GCONV board in Gearbox bypass mode.
Note: Unless otherwise specified, displayed LED colour within the photos do not
necessarily reflect actual LED colour for the given step.
1. Connect a video source to the dedicated input (J1).
Figure 1-1: Input (J1)
2. Connect a video monitor to the dedicated output (J5).
Figure 1-2: Output (J5)
3. Connect the 12V power supply to J11. If "red" LED is on (see
supply is connected backwards; power off and reverse connections.
Figure 1-3: Power Supply (J11)
RDK-12GCONV
Reference Design Kit User Guide
PDS-061593
Output
(J5)
www.semtech.com
Rev.0
August 2017
Input
(J1)
Figure
1-4), the power
Power (+12V)
(J11)
6 of 44
Semtech
Proprietary & Confidential
Advertisement
Table of Contents
