Table of Contents
Advertisement
4.4 Advanced Settings
This tab provides advanced configuration of the board and advanced GS12070 settings.
Note: Due to the limited I/O ports in this RDK, some of the GS12070 advanced features
are unavailable. Please refer to GS12070 Data Sheet (PDS-061012) for full description of
the advanced features of the device.
4.4.1 Input Tab
Advanced input settings of the GS12070:
•
Lock: Selectable lock override for Input 0 through Input 3. Manual Lock Override is
required when passing PRBS signals from a Bit Error Rate Tester.
•
LOS: Selectable LOS override and polarity inversion for Input 0 through Input 3.
•
Manual Rate: Selectable Manual Rate Override. Manual Rate Override is required
when passing PRBS signals from a Bit Error Rate Tester.
•
Power Down: Selectable input power down Override for DDI0 through DDI3.
Figure 4-13: Advanced Input
RDK-12GCONV
Reference Design Kit User Guide
PDS-061593
www.semtech.com
Rev.0
August 2017
23 of 44
Semtech
Proprietary & Confidential
Advertisement
Table of Contents
