Table of Contents
Advertisement
4.
For MP3, Smart Phones and Computer connections, connect the
1/8" stereo male end of the cable to the headphone jack located
on your electronic device.
For Flat screen TVs and Stereo Systems connection, connect the
two RCA male ends of the cable to the left and right audio outputs located
on the back panel of the electronic device.
5.
Power up the transmitter by pressing and holing the POWER button
6.
Press and hold the Mode button
for stereo Line-in mode operations.
F
Please refer to the "Tx Button Function Matrix" section of this manual for detailed instructions .
7.
Place the transmitter (Tx) dongle next to the electronic device.
F
Please proceed to page 28 for the receiver connection
r
until the Blue LED display two fast flashes
TRANSMITTER CONNECTION
k
for 2 seconds.
Wi-AudioLink
r
k
(Tx)
27
Advertisement
Table of Contents
