8. Firmware updates
Firmware updates are released through the website www.sdifire.com. Before updating
your firmware, always check:
•
If the update you downloaded is intended for your device type (the VOX-01)
•
If you have sufficient battery charge to complete the update cycle without
interruption
Interrupting the power supply during the update process may render your device unusable.
If this happens, try to repeat the update procedure. If this does not work, please contact
support@sdifire.com.
Executing a firmware update is easy:
•
Choose and download the correct firmware update package from www.sdifire.com
•
Connect the VOX-01 to any PC or Mac through USB
•
When prompted on the LCD screen, choose "connect through USB"
•
The VOX-01's internal file system can now be accessed from your computer
in the same way as any mass storage device
•
Copy the firmware updated package to the folder named "updates"
•
Now restart the VOX-01 using its power button
The firmware update procedure will automatically start. You will be able to see the progress
of the update procedure (which may take between 3 and 30 minutes, depending on the size
of the update package) on the LCD display.
Never interrupt the firmwate update procedure. Make sure that the VOX-01
is fully charged or connected to a stable power source before starting the
update procedure.
Please be aware that the update procedure may take a significant amount of
time, depending on the update package that you are installing.
www.sdifire.com/support/#productsoftwareupdates
VOX-01 Operating Manual
43