Epson PowerLite S39 Quick Setup page 3

6
Select the Wired LAN menu and press
7
Choose IP Settings and press
8
If your network assigns addresses automatically, turn on the DHCP setting.
If not, turn off the DHCP setting and enter the projector's IP Address,
Subnet Mask, and Gateway Address, as needed. Then press Esc.
9
To prevent the IP address from appearing on the network standby screen,
set the IP Address Display setting to Off.
10
When you are finished, select Complete and press
again to save your settings.
11
Press the Menu button to exit the menu system.
Setting up a wireless
connection
Follow the steps here to set up the projector for a wireless connection. You will
need the optional wireless LAN module (part number V12H731P02).
Install the optional LAN module
1
Remove the wireless LAN module cover screw.
2
Insert the optional wireless LAN module into the USB-A port.
3
Attach the included wireless LAN module cover and secure it using the
screw you removed.
Note: The light on the wireless LAN module turns on when the module is
installed and operating. The light flashes when the module is communicating
over the network.
.
.
, then press
Select wireless network settings
1
Press the Menu button on the remote control.
2
Select the Network menu and press
3
Select Wireless LAN On as the Wireless Mode setting.
4
Select Network Configuration and press
5
Select the Wireless LAN menu and press
6
Select one of the following as the Connection Mode setting:
•
Quick for a direct connection to a computer, tablet, or smartphone.
•
Advanced to connect your projector to a router or access point.
7
Select any other settings on the Wireless LAN menu as necessary. See the
online User's Guide for details.
8
When you finish selecting settings, select Complete and follow the
on-screen instructions to save your settings and exit the menus.
Install the optional software
If you connected a computer to the projector, you can download and install
optional software to perform various tasks wirelessly, such as monitoring or
controlling your projector and projecting from multiple computers.
You can download the optional software and its manuals from the Epson
website, as described in "Where to get help".
Projecting from a mobile
device
You can project wirelessly from a mobile device (iOS, Android™, or
Chromebook™) using the Epson iProjection™ app and a QR code.
1
Use the following QR code to download and install the Epson iProjection
app.
2
If you connected the projector to a network wirelessly, make sure to
connect your mobile device to the same network.
3
Press the LAN button on the remote control to display a QR code on the
projector screen.
4
Start Epson iProjection on your mobile device.
.
.
.