Epson PowerLite S39 Quick Setup page 2

5
Use the arrow buttons on the remote control to highlight any of the
options on the Home screen that appears, then press
You can switch between projection sources and quickly access various
adjustment options from this screen.
6
The default language of the menu system is English. To select another
language, press the Menu button on the projector or remote control.
Select Extended and press
your language and press . Press the Menu button to exit the menu
system.
Adjust the image
1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
To reduce or enlarge the image, turn the zoom ring.
4
To sharpen the image, turn the focus ring.
5
If your image looks like or
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can't
move the projector, use the horizontal keystone slider on the projector to
correct the image shape.
6
Your projector automatically adjusts images that look like
but if necessary you can press the
correct it.
to select it.
. Select Language and press . Select
, you may have placed the projector
or
or button on the projector to
Using the remote control
Install the batteries as shown (two AA batteries).
Turn projector
on and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online User's Guide.
Project over a wired
network
Follow the steps here to configure your projector for your wired network using
the projector's menu system (PowerLite X39/W39).
1
Plug in and turn on the projector.
2
Press the Menu button on the remote control, select the Network menu,
and press .
3
Select Network Configuration and press
4
Select the Basic menu and press
,
5
Select the Projector Name setting and enter a name (up to 16 characters
long) to identify your projector over the network.
Use the displayed keyboard to enter characters. Press the arrow buttons
on the remote control to highlight the characters and press
them.
Note: See the online User's Guide for information on adding passwords.
Choose which source
to display
Navigate projector
menus
Access the Home
screen
.
.
to select