Table of Contents
Advertisement
Parameter
Onchip Legacy
Audio
Onboard FDD
Controller
Onboard Serial
Port 1
Onboard Serial
Port 2
Description
This item is used to enable or disable
the onboard legacy audio.
If enabled, the following parameters
can be selected:
SB I/O Base
SB IRQ Select
SB,DMA Select
MPU-401 I/O Address
Setting this parameter to Enabled
allows you to connect your floppy
disk drives to the onboard floppy
disk connector instead of a separate
controller card. Change the setting
to Disabled if you want to use a
separate controller card.
This item allows you to assign an
address and interrupt for the board
serial port.
This item allows you to assign an
address and interrupt for the board
serial port.
Options
Disabled
Enabled
220H, 240H,
260H, and 280H
IRQ5, IRQ7,
IRQ9, and IRQ10
DMA1, DMA0,
DMA2, and
DMA3
330-333, 300-
303, 310-313,
and 320-323H
Enabled
Disabled
3F8/IRQ4
Auto
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
2F8/IRQ3
Auto
3F8/IRQ4
3E8/IRQ4
2E8/IRQ3
Disabled
65
Advertisement
Table of Contents
