Telephone Settings - Nokia E66 User Manual

Security settings
Select Menu Tools Settings
> > >
Security.
Avoid using codes that are similar to emergency
numbers to prevent accidental dialling of the
emergency number. Codes are shown as asterisks.
When you change a code, enter the current code, then
the new code twice.
Device and SIM card security
To change the PIN code, select Phone and SIM card
PIN code. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorised
use and is provided with the SIM card. After three
consecutive incorrect PIN code entries, the code is
blocked, and you need to use the PUK code to unblock
it before you can use the SIM card again.
To set the keypad to lock automatically after a defined
period, select Phone and SIM card
autolock period.
To set a time-out after which the device is
automatically locked and can be used only if the correct
lock code is entered, select Phone and SIM card
Phone autolock period. Enter a number for the time-
out in minutes, or select None to set off the autolock
period. When the device is locked, you can still answer
incoming calls, and calls may still be possible to the
official emergency number programmed into your
device.
To set a new lock code, select Phone and SIM card
88 Lock code. The preset lock code is 12345. Enter the
current code and then the new code twice. The new
Cyan Cyan Cyan Cyan
code can be 4-255 characters long. Both alphabets and
digits can be used, and both uppercase and lowercase
General alphabets are possible. The device notifies you if the
>
lock code is not properly formatted.
Restore original settings
To restore the original device settings, select
settings. To do this, you need your device lock code.
After resetting, the device may take a longer time to
power on. Documents, contact information, calendar
entries, and files are unaffected.
>

Telephone settings

Select Menu Tools
>
Call settings
Keypad
>
To display your phone number to the person you are
calling, select Call Send my caller ID
>
the network determine whether your caller ID is sent,
select Set by network.
>
To display your net call address to the person you are
calling using a net call, select
call ID > Yes.
To be notified of a new incoming call while you have a
call in progress, select
Options > Activate. To check if the function is active
on the network, select
>
Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
Factory
Settings > Phone.
>
> Yes. To let
Call Send my internet
>
Call Call waiting
> >
Options Check status.
>