Think Safety First; Understanding The Safety-Interlock System - Toro TimeCutter Operator's Manual

new, placing additional load on the engine. Allow
40 to 50 hours of break-in time for new machines to
develop full power and best performance.

Think Safety First

Please read all safety instructions and symbols in the
safety section. Knowing this information could help
you or bystanders avoid injury.
DANGER
Operating the machine on wet grass or steep
slopes can cause sliding and loss of control.
• Do not operate on slopes greater than 15
degrees.
• Reduce speed and use extreme caution on
slopes.
• Do not operate the machine near water.
DANGER
Wheels dropping over edges can cause
rollovers, which may result in serious injury,
death, or drowning.
Do not operate the machine near drop-offs.
1. Safe zone—use the
machine here
2. Use a walk-behind mower
and/or hand trimmer near
drop-offs and water.
Figure 9
3. Water
CAUTION
This machine produces sound levels in
excess of 85 dBA at the operator's ear and
can cause hearing loss through extended
periods of exposure.
Wear hearing protection when operating this
machine.
Use protective equipment for your eyes, ears, hands,
feet, and head.
1. Wear safety glasses.
Understanding the
Safety-Interlock System
WARNING
If the safety-interlock switches are
disconnected or damaged, the machine could
operate unexpectedly, causing personal
injury.
• Do not tamper with the interlock switches.
• Check the operation of the interlock
switches daily and replace any damaged
switches before operating the machine.
The safety-interlock system is designed to prevent the
engine from starting unless:
•
The blades are disengaged.
•
The motion-control levers are in the P
g000513
The safety-interlock system also is designed to stop
the engine whenever the control levers are out of the
P position and you rise from the seat.
ARK
16
Figure 10
2. Wear hearing protection.
ARK
g009027
position.