Prince Castle 840-T series Operating Instructions Manual page 3

4. Once you press ENTER ,The CHANNEL/FUNC-
TION display switches to CKC=MAN CANCEL ,
this allows you to select a manual or an automatic
alarm cancel , press the SCAN UP arrow or SCAN
DOWN arrow to toggle between AUT and MAN
Cancel. Press the ENTER button to store your
selection.
CKC=MAN CANCEL
6 : 0 0
5. After you press ENTER, the CHANNEL/FUNCTION
display will change to CKL=COOK. To select an
alternate function (see list below) use the SCAN
UP or SCAN DOWN arrows. Press ENTER to store
the selection. The function name selected will be
displayed during the final countdown sequence.
Note: The function name options are as follows:
BAKE, BAKE MORE, BASTE, BRAISE, CHILL,
COOK, COOK DUTY 1, COOK DUTY 2, COOK
DUTY 3, COOK MORE, COVER, DISCARD,
DONE, DROP, END, FOLD, FRY, FRY MORE,
GRILL, GRILL MORE, HOLD, HOLD DUTY, MIX,
POACH, POUR, REMOVE, ROTATE, SEAR,
SHAKE, SIDE 1, SIDE 2, STIR, TURN, WHIP And
WRAP.
CKL=COOK
6 : 0 0
6. After pressing the ENTER button, the CHANNEL/
FUNCTION display will read CKT=COOK TIME.To
move on to the DUTY function press the selected
CHANNEL BUTTON once.The CHANNEL/FUNC-
TION display reads D1T=DUTY 1 TIME  and :30
Seconds (The Factory Preset) will appear in the
TIME DISPLAY.
840-507revC
ENTER
7. To set the DUTY TIME Press the SCAN UP Arrow
Button. If no DUTY TIME is desired use the SCAN
DOWN Arrow Button to set the DUTY TIME to 0:00,
press ENTER to store your setting.
8. Once you press ENTER ,The CHANNEL/FUNC-
TION display switches to D1C=MAN CANCEL  ,
this allows you to select a manual or an automatic
alarm cancel , press the SCAN UP arrow or SCAN
DOWN arrow to toggle between AUT and MAN
Cancel. Press the ENTER button to store your
selection.
ENTER
9. After you press ENTER, the CHANNEL/FUNCTION
display will change to CKL=COOK. To select an
alternate function (see list by step 5) use the
SCAN UP or SCAN DOWN arrows. Press ENTER
to store the selection. The function name selected
will be displayed during the DUTY 1 sequence.
3
D1T=DUTY 1 TIME
0 : 30
DT1=DUTY TIME1
0 0 : 0 0
DT1=MAN CANCEL
0 : 0 0
Printed in USA 4/07 © 2007
ENTER
ENTER
ENTER