Download Print this page

Preparing For First Use - Gemini WRX-843 Series User Manual

Hide thumbs Also See for WRX-843 Series:

Advertisement

INTRODUCTION
Thank you for purchasing our WRX-843 Series speaker.
We are confident that the Gemini family of products will
not only make your life easier using the latest techno-
logical advancements in cross-platform connectivity and
sound reproduction, but will raise the bar for DJ and pro
audio products.
With the proper care & maintenance, your unit will likely
provide years of reliable, uninterrupted service. All Gemi-
ni products are backed by a 1-year limited warranty*.

PREPARING FOR FIRST USE

Please ensure that you find these accessories included
with your WRX-843 speaker:
(1) Power Cord;
(1) Operating Instructions;
CAUTION
1. All operating instructions should be read before using
this equipment.
2. To reduce the risk of electrical shock, do not open the
unit. There are NO USER REPLACEABLE PARTS INSIDE.
Please refer servicing to a qualified Gemini service tech-
nician. Do not attempt to return this equipment to your
dealer.
3. Do not expose this unit to direct sunlight or to a heat
source such as a radiator or stove.
4. This unit should be cleaned only with a damp cloth.
Avoid solvents or other cleaning detergents.
5. When moving this equipment, it should be placed in
its original carton and packaging. This will reduce the
risk of damage during transit.
6. DO NOT EXPOSE THIS UNIT TO WATER OR HEAT.
7. DO NOT USE CLEANING PRODUCTS OR LUBRI-
CANTS ON THE CONTROLS OR SWITCHES.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Always follow the basic precautions listed below to
avoid the possibility of serious injury or even death
from electrical shock, short-circuiting, damages, fire,
or other hazards.
• READ INSTRUCTIONS:
All the safety and operating instructions should be read
before the product is operated.
• RETAIN INSTRUCTIONS:
The safety and operating instructions should be retained
for future reference. All the safety and operating instruc-
tions should be read before the product is operated.
• HEED WARNINGS:
All warnings on the product and in the operating in-
structions should be adhered to.
• FOLLOW INSTRUCTIONS:
All operating and use instructions should be followed.
• CLEANING:
The product should be cleaned only with a polishing
cloth or a soft dry cloth. Never clean with furniture wax,
benzene, insecticides or other volatile liquids since they
may corrode the cabinet.
• WATER AND MOISTURE:
Do not use this product near water, for example, near
a bathtub, wash bowl, kitchen sink, or Laundry tub; in a
wet basement; or near a swimming pool; and the like.
• DO NOT OPEN:
Do not open the device or attempt to disassemble the
internal parts or modify them in any way. The device
contains no user- serviceable parts. If it should appear
to be malfunctioning, discontinue use immediately and
have it inspected by qualified GEMINI service personnel.
• REPLACEMENT PARTS:
When replacement parts are required, be sure the ser-
vice technician has used replacement parts specified by
the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
• LOCATION:
If you use a stand, check the stand's specifications and
make sure that it is sturdy enough to support the weight
of the speaker. You may need to limit the number of
people around the placed stand, to avoid toppling the
device or causing damage to the internal components.
Also, be sure to keep the following cautions.
– Use the speaker stands with their legs fully opened.
– Mount only one speaker on each speaker stand.
– Tighten fastening screws securely.
– Remove the speakers from the stands before moving
the stands or adjusting their height.
– Add weight such as sand bags around the stand legs to
prevent them from falling over.
– Use the stand at a maximum height of 140cm (55").
– If you use the socket of the GVX subwoofer to allow
mounting of a satellite speaker, use a pole 100cm max.
with an outer diameter of 35mm (1-3/8").
– When transporting the device, always use two or more
people.
– Before moving the device, remove all connected cables.
– Do not use the speaker's handles for suspended instal-
lation. Doing so can result in damage or injury.
– Do not expose the device to excessive dust or
vibrations, or extreme cold or heat (such as in direct
sunlight, near a heater) to prevent the possibility of panel
disfiguration or damage to the internal components.
– Do not place the device in an unstable position where
it may accidentally fall over.
• CONNECTIONS: Before connecting the device to other
devices, turn off the power for all devices. Before turning
the power on or off for all devices, set all volume levels
to minimum.
– Use only speaker cables for connecting speakers to the
speaker jacks. Use of other types of cables may result
in fire.
– Be sure to observe the amplifier's rated load impedance,
particularly when connecting speakers in parallel.
Connecting an impedance load outside the amplifier's
rated range can damage the amplifier.

Advertisement

loading