Hood - Chevrolet Traverse 2018 Owner's Manual

Keep a record with all parts receipts
and list the mileage and the date of
any service work performed. See
Maintenance Records 0 376.
Caution
Even small amounts of
contamination can cause damage
to vehicle systems. Do not allow
contaminants to contact the fluids,
reservoir caps, or dipsticks.

Hood

To open the hood:
1. Pull the hood release handle
with this symbol on it. It is
under the instrument panel on
the driver side of the vehicle.
2. At the front of the vehicle, pull
up on the center of the hood,
and push the secondary hood
release to the right.
3. After you have partially lifted
the hood, gas struts will
automatically take over to lift
and hold the hood in the fully
open position.
To close the hood:
1. Before closing the hood, be
sure all filler caps are properly
installed.
2. Pull the hood down to close.
Lower the hood until the lifting
pressure of the strut is
Vehicle Care
reduced. Then allow the hood
to fall and latch into place
under its own weight
3. Check to make sure the hood
is closed. If the hood does not
fully latch, gently push the
hood down at the front and
center of the hood until it is
completely latched.
285