Clock - Chevrolet Traverse 2018 Owner's Manual

128 Instruments and Controls

Clock

Base Radio
The infotainment system controls
are used to access the time and
date settings through the menu
system. See Operation 0 178 on
how to use the menu system.
Setting the Time and Date
When Auto Set is enabled the time
cannot be manually set.
1. Press , then touch
SETTINGS.
2. Touch Time and Date, then Set
Time or Set Date.
3. Touch + or to adjust the
value.
4. Touch or to adjust AM or
PM for 12 hour format.
0
5. Touch .
Auto Set
Auto Set requires an OnStar
service plan.
If auto set is on, the time displayed
on the clock may not update
immediately when driving into a new
time zone.
1. Press , then touch
SETTINGS.
2. Touch Time and Date, then
Auto Set.
3. Choose from the available
selections.
0
4. Touch .
Setting the 12/24 Hour Format
1. Press , then touch
SETTINGS.
2. Touch Time and Date, then
select 12h or 24h format.
0
3. Touch .
Setting the Month and Day
Format
1. Press , then touch
SETTINGS.
2. Touch Time and Date, then Set
Date Format.
3. Select DD/MM/YYYY (day/
month/year), MM/DD/YYYY
(month/day/year), or YYYY/
MM/DD (year/month/day)
format.
0
4. Touch .
Uplevel Radio
The infotainment system controls
are used to access the time and
date settings through the menu
system. See Using the System
under Introduction in the
infotainment manual.
To set the time:
1. Touch SETTINGS from the
Home Page, then touch Time
and Date.
2. Touch Set Time and touch
or to increase or decrease
hours, minutes, and AM or PM.
Touch 12 24 Hr for 12 or
24 hour clock.
3. Touch the back icon to go back
to the previous menu.