Unpack , Inspect; Rack -Mounted Rfc Configuration; Mast -Mounted Rfc Configuration - ADTRAN TRACER User Manual

61280.003L1-1B
U , I
NPACK NSPECT
Carefully inspect the Tracer for any shipping damages. If damage
is suspected, file a claim immediately with the carrier then contact
ADTRAN Customer Service. If possible, keep the original shipping
container for use in shipping the Tracer back for repair or for
verification of damage during shipment.
Before beginning installation, verify that all of the following
components are present.
R -
ACK MOUNTED
Provided by ADTRAN --
• Baseband processor
• Rack-mounted RFC
• BBP to RFC IF interconnect cable
• DS1/DSX-1 interface cables (RJ-48 to RJ-48)
Provided by customer --
• Antenna feedline cable
• Antenna and mounting hardware
• VT-100 terminal and RS-232 interface cable (optional)
• 21 to 56 volt DC power source (available from ADTRAN), either
M -
AST MOUNTED
Provided by ADTRAN --
• Baseband processor
• Mast-mounted RFC
• DS1/DSX-1 interface cables (RJ-48 to RJ-48)
Provided by customer --
• Antenna feedline cable
• Antenna and mounting hardware
• BBP to mast-mounted RFC IF interconnect cable
• VT-100 terminal and RS-232 interface cable (optional)
• 21 to 56 volt DC power source (available from ADTRAN), either
4/12/99
RFC
CONFIGURATION
polarity referenced to ground
RFC
CONFIGURATION
polarity referenced to ground
:
:
P 17
AGE
I
NSTALLATION