Table of Contents
Advertisement
Component
(2)
Power light
(3)
Security cable slot
(4)
USB 3.x SuperSpeed ports (2)
(5)
Audio-out (headphone)/Audio-in (microphone)
combo jack
(6)
Volume button
(7)
Drive light
Description
On: The computer is on.
●
Blinking: The computer is in the Sleep state, a power-
●
saving state. The computer shuts off power to the display
and other unneeded components.
Off: The computer is off or in Hibernation. Hibernation is a
●
power-saving state that uses the least amount of power.
Attaches an optional security cable to the computer.
NOTE:
The security cable is designed to act as a deterrent, but
it may not prevent the computer from being mishandled or
stolen.
Connect a USB device, such as a cell phone, camera, activity
tracker, or smartwatch, and provide high-speed data transfer.
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable. Also connects an
optional headset microphone. This jack does not support
optional standalone microphones.
WARNING!
To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset.
For additional safety information, refer to the Regulatory, Safety,
and Environmental Notices.
To access this guide:
Select the Start button, select HP Help and Support, and
▲
then select HP Documentation.
NOTE:
When a device is connected to the jack, the computer
speakers are disabled.
Controls speaker volume on the computer.
Blinking white: The hard drive is being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the hard
●
drive.
NOTE:
For information about HP 3D DriveGuard, see
3D DriveGuard (select products only) on page
Using HP
37.
Left side
9
Advertisement
Table of Contents
