Switching The Headset On And Off - BlueTrek BT01 User Manual

6. Switching the Headset ON and OFF:

6.a. Switching the Headset ON :
If you Headset is switched OFF, press button 1 for about 3 seconds until the light flashes green
and red, and you will hear a music tone in the speaker. Your Headset is now ready to make
and receive calls.
6.b. Switching the Headset OFF :
Once you have finished using the Headset, press at the same time on buttons 1 and 2 for
about 1 second until you hear a music tone in the speaker.
Position the headset
properly on your ear and
then release the speaker.
Finally, make sure that the
speaker fits well into your
ear. At this stage it should
be stable and comfortable.
Your headset is now
ready.