Table of Contents
Advertisement
Microphone
Adjustable
speaker
3. Charging BlueTrek®
Your Headset is delivered uncharged. So before you start to use Bluetrek®, you must
fully recharge it for about 2 hours.
It is mandatory to use the charger provided with your product. The use of any other
charger will automatically suspend the warranty.
Plug the charger jack into the Headset. Because the jack is new, it is harder to plug when you
start to use it. So please make sure you push it completely. During the charge (about 2
hours), the Headset light will be red and continuously on. Once the charge is completed, the
light with turn to green. You can now use your headset.
When you hear a beep in your Headset at regular intervals or approximately 1 minute, your
Headset needs to be recharged. It is recommended to recharge your headset to full capacity
once a day, until the light turns to green.
During the charge you still can use your headset.
The Headset is using a rechargeable battery that has a life of about 500 charging cycles. Once
the talk-time of your Headset is reduced significantly, contact your vendor for battery
replacement. The battery must be disposed of properly and may need to be recycled. Please
contact your local recycling for proper disposal. Do not dispose of batteries in fire as they may
explode.
Advertisement
Table of Contents
