Table of Contents
Advertisement
802.11x configure
EAP TYPE
Tunnel
Username
Identity
Password
Certificate
OK
Cancel
setting from the radio button.
Encryption：This setting is the configuration key
used in accessing the wireless network via WEP
encryption.
A key of 10 hexadecimal characters (0-9, A-F) is
required if a 64-bit Key Length was selected.
A key of 26 hexadecimal characters (0-9, A-F) is
required if a 128-bit Key Length was selected.
A key of 58 hexadecimal characters (0-9, A-F) is
required if a 256-bit Key Length was selected.
Select the EAP TYPE from the pull-down list.
Including MD5, GTC, TLS, LEAP, TTLS and PEAP.
Select the tunnel from the pull-down menu, including
CHAP,
MSCHAP,
MSCHAP-V2,
EAP-MD5.
Type in the user name assigned to the certificate.
Enter the identity in this column.
This panel is available when EAP-TLS is not selected
(either MSCHAP V2 over PEAP is selected with
WEP or LEAP is selected for CCX). This panel
enables you to enter a login name and password or
request that the driver prompt for them when you
connect to a network.
Please query your network manager about the
certificate, select the same certificate as the
certification server.
Click OK to save the configuration.
Click Cancel to exit the configuration screen.
-
17 -
PEAP
and
Advertisement
Table of Contents
