Control Unit (Rear Panel) - Datavideo AD-200 Main Unit Instruction Manual

Control Unit (Rear Panel)

Connection
Use D-SUB Cable to connect AD-200 main unit to AD-200 control unit.
Audio Input
Audio input of control unit must be connected to audio output of main unit via a connected cable.
DC IN Socket
Connect the supplied 12V PSU to this socket. The power connection can be secured by screwing
the outer fastening ring of the DC In plug to the socket.
Note: AD-200 main unit and AD-200 control unit both have DC IN Socket, they are the same
function, you just need select one socket to supply the power input.
Grounding Terminal
When connecting this unit to any other component, make sure that it is properly grounded by
connecting this terminal to an appropriate point. When connecting, use the socket and be sure to
2
use wire with a cross-sectional area of at least 1.0 mm .
- 9 -