Datavideo AD-200 Main Unit Instruction Manual
Datavideo AD-200 Main Unit Instruction Manual

Datavideo AD-200 Main Unit Instruction Manual

Audio delay box with level adjustment
Hide thumbs Also See for AD-200 Main Unit:

Advertisement

Quick Links

AUDIO DELAY BOX WITH
LEVEL ADJUSTMENT
AD-200
Instruction manual

Advertisement

Table of Contents
loading

Summary of Contents for Datavideo AD-200 Main Unit

  • Page 1 AUDIO DELAY BOX WITH LEVEL ADJUSTMENT AD-200 Instruction manual...
  • Page 2: Table Of Contents

    SPECIFICATIONS ................................- 12 - Disclaimer of Product & Services The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete.
  • Page 3: Fcc Compliance Statement

    7. This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company.
  • Page 4: Warranty

    Warranty Standard Warranty Datavideo equipment are guaranteed against any manufacturing defects for one year from the date of • purchase. The original purchase invoice or other documentary evidence should be supplied at the time of any • request for repair under warranty.
  • Page 5: D-Sub Cable

    Connection of AD-200 main unit and AD-200 control unit AD-200 Main Unit Connected CABLE D-SUB CABLE AD-200 Control Unit D-Sub Cable Connected Cable - 5 -...
  • Page 6: Main Unit (Front Panel)

    Connections & Controls Main Unit (Front Panel) Connection Use D-SUB Cable to connect AD-200 main unit to AD-200 control unit. Audio Output Audio input of control unit must be connected to audio output of main unit via a connected cable.
  • Page 7: Main Unit (Rear Panel)

    Main Unit (Rear Panel) Audio Output RCA audio output & 4 XLR balanced audio output channels (You can use ch1, 2 audio out for XLR or RCA). Audio input RCA audio input & 4 XLR balanced audio input channels (You can use ch1, 2 audio input for XLR or RCA) AUX Audio Input 2 channels of XLR balanced audio input.
  • Page 8: Control Unit (Front Panel)

    Control Unit (Front Panel) Power Switch Switches the power On / Off. Headphone Accepts a stereo mini jack plug for stereo headphones. The headphone volume is adjusted by rotating head phone volume control. Headphone Volume Control Controls Headphone volume level. Use the Headphone section to accurately monitor any of the sources output.
  • Page 9: Control Unit (Rear Panel)

    DC In plug to the socket. Note: AD-200 main unit and AD-200 control unit both have DC IN Socket, they are the same function, you just need select one socket to supply the power input.
  • Page 10: Aux Audio Inputs And Levels

    AUX Audio Inputs and Levels There are two types of switches for configuring AUDIO IN: The LINE/MIC+40dB/MIC+60dB switch is used to set the AUDIO IN to LINE IN, MIC+40dB IN or MIC+60dB IN. When LINE IN is selected, set the 48V switch to OFF in order to prevent damage to the circuit due to excessive current flow.
  • Page 11 DELAY TIME This function sets audio input delay time ranging from 0000~3000 mSEC. TONE MODE FQ.: This function sets TONE frequency of 1KHz, 6KHz or 12 KHz LEL: This function sets TONE level ranging from -48~+24 dBu. DISPLAY BRI.: This function sets OLED panel brightness. There are five brightness levels with five filled square boxes being the brightest and one filled square box being the least bright.
  • Page 12: Specifications

    Specifications AUX IN Parameter Specification Limit Units Conditions/Comments MIC/Line Connectors (CH5~CH6) 3Pin XLR Female Pin2=(+),Pin3=(-),Pin1=GND Ω Mic/Line Input Impedance(CH5/CH6) 2K/3K Mic Gain Range +40dB /+60dB ±3 Slide switch Line Gain Range off to +12 ±3 Audio source GAIN(knob) THD+N 0.01 @1KHz,0dB(Lin IN) Line in Max Level +23dBu...
  • Page 13 Display 1,77" OLED 160XRGBX128 Audio Delay for audio input 0~3 sec Operating and Storage temperature Parameter Specification Operating temperature 0˚C ~ +50˚C Storage temperature 0˚C ~ +60˚C Certification CE / FCC AD-200 Main Unit AD-200 Control Unit - 13 -...
  • Page 14 Service & Support It is our goal to make owning and using Datavideo products a satisfying experience. Our support staff is available to assist you to set up and operate your system. Contact your local office for specific support requests. Plus, DATAVIDEO WORLDWIDE OFFICES please visit www.datavideo.com to access our FAQ section.

This manual is also suitable for:

Ad-200 control unit

Table of Contents