Poulan Pro 193732 Operator's Manual page 6

"FABRIC TOP" GRASS CATCHERS
TO ASSEMBLE AND ATTACH GRASS
CATCH ER
• Put grass catcher frame into grass bag
with rigid part of bag on the bottom.
• Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too stiff, hold
them in warm water for a few minutes. If
bag gets wet, let it dry before using.
• Lift the rear door on the mower housing.
• For HINGE BRACKET mounted catcher,
place the grass catch er frame onto the
formed tabs on the rear door hinge
bracket.
• For HANDLE BRACKET mounted
catcher, place frame side hooks into
slots in handle brackets.
• For DOOR PIVOT PIN mounted catcher,
place the grass catcher frame hooks
onto the door pivot pins.
• For DOOR SLOT mounted catcher,
place the grass catcher frame hooks into
the slots of the rear door.
NOTE: The grass catcher is secured to the
lawn mower housing when the rear door is
lowered onto the grass catcher frame.
Vinyl
bindings
CAUTION: Under normal usage, the
catcher material is subject to de te ri o ra tion
and wear and should, therefore, be
checked frequently for replacement. Any
replacement catcher should be checked to
ensure compliance with original man u fac -
tur er's spec i fi ca tions.
CAUTION: Do not run lawn mower
with out the discharge guard (rear door),
approved grass catcher, clipping de fl ec tor
or mulcher plate in place. Never attempt
to operate mower with the dis charge guard
(rear door) removed or propped open.
HINGE BRACKET MOUNTED
Formed tabs
HANDLE BRACKET MOUNTED
Handle bracket hooks
Frame
handle
Catcher frame side hook
DOOR PIVOT PIN MOUNTED
Frame
opening
Catcher frame hook
Catcher frame hook
6
Hinge bracket
Pivot pins
DOOR SLOT MOUNTED
Rear door slots
Rear door
Grass
catcher
frame
Rear Grass
door catcher
handle
Rear Grass
catcher
door
handle
Grass
catcher
han dle