ASROCK X299 Extreme4 User Manual page 74

ODT PARK (C1)
Configure the memory on die termination resistors' PARK for channel C1.
ODT PARK (C2)
Configure the memory on die termination resistors' PARK for channel C2.
ODT PARK (D1)
Configure the memory on die termination resistors' PARK for channel D1.
ODT PARK (D2)
Configure the memory on die termination resistors' PARK for channel D2.
ODT NOM (A1)
Use this to change ODT (A1) Auto/Manual settings. The default is [Auto].
ODT NOM (A2)
Use this to change ODT (A2) Auto/Manual settings. The default is [Auto].
ODT NOM (B1)
Use this to change ODT (B1) Auto/Manual settings. The default is [Auto].
ODT NOM (B2)
Use this to change ODT (B2) Auto/Manual settings. The default is [Auto].
ODT NOM (C1)
Use this to change ODT (C1) Auto/Manual settings. The default is [Auto].
ODT NOM (C2)
Use this to change ODT (C2) Auto/Manual settings. The default is [Auto].
ODT NOM (D1)
Use this to change ODT (D1) Auto/Manual settings. The default is [Auto].
ODT NOM (D2)
Use this to change ODT (D2) Auto/Manual settings. The default is [Auto].
MRC Promote Warnings
Determines if MRC warnings are promoted to system level.
Promote Warnings
Determines if warnings are promoted to system level.
68