Table of Contents
Advertisement
areas in high-contrast scenarios.
DAY EXPOSURE has these submenu items: WDR CTRL, WDR ZONE, EXPOSURE PREF, BLC, and
DAY AGC.
WDR CTRL: Specifies WDR (wide dynamic range) preset or user-adjustable control settings.
Available choices are LOW, NORMAL, MEDIUM, HIGH, and CUSTOM
that by choosing CUSTOM, the subsequent AUTO-RANGE sub-menu will appear.
AUTO-RANGE
BIAS (-30~30):
LIMIT (0~36):
WDR ZONE: Specifies the screen region for WDR calibration reference. There are 4 presets,
each with its own factory default settings: WD NORMAL, SAFE AREA, CTR SPOT, and
LOWER 1/3.
Each of these 4 presets can be further adjusted by pressing ENTER – the ZONE adjustment
screen will appear with the following stages (in order):
Position Adjustment Border Expansion Border Contraction
Position Adjustment
ZONE for adjustment
The ZONE for adjustment is the rectangle with white double border lines. To move this ZONE,
simply shift the OSD toggle switch up/down/left/right or press any directional button. Then
press ENTER to advance to the Border Expansion stage.
Border Expansion
The ZONE for adjustment becomes the rectangle with green double border lines. To move any
border outward, simply shift the OSD toggle switch (or press any directional button) in the
direction corresponding to that border. Then press ENTER to advance to the Border
Contraction stage.
Sets WDR luminance bias
Sets dynamic range limit factor for EXPOSURE PREF.
ZONE for adjustment
OSD Menu Descriptions
(AUTO-RANGE)
ZONE
ZONE
User's Manual
. Note
3-3
Advertisement
Table of Contents
