Reach T-3i Installation Manual page 8

Center the running belt
Place treadmill on a level surface. Run
Treadmill at approximately 6-8KM/H,
checking the running condition.
If the belt has drifted to the right, pull out of
the save clock and switch, turn the right
adjusting bolt 1/4 turn clockwise, then start
running until centering the belt. PIC A
If the belt has drifted to the left ,pull out of
the safety clock and switch, turn the left
adjusting bolt 1/4 turn clockwise ,then start
running until centering the belt .PIC B
Timely adjust the tightness of the belt,
f o r the looseness after a period of time
running. Pull out of the safety clock and
switch , turn the left and right adjusting bolt
1/4 turn clockwise ,then re-start running,
confirm the belt-tightness until the belt be
right tightness. PIC C
8