Voice Command Help; Setting Up The Voice Command System; Setting Voice Prompt On/Off; Speaker Adaptation - Hyundai Sonata User Manual

3. The inputted command is fed back to the
screen and voice system. If the command
was not recognized properly, say "Back".
INFORMATION
The commands which can currently be
●
inputted are displayed on the screen in yel-
low.
● To terminate the voice recognition system,
either say "cancel" or press the for over
0.8 second.
● Be aware that during the operation of the
voice recognition system, pressing the hard
keys or the screen will terminate the voice
recognition system.
PART 5 VOICE COMMAND SYSTEM
Setting up the voice command
system

Setting voice Prompt ON/OFF

● Voice prompt ON : all system prompts are
provided.
Voice prompt OFF : most of the system
●
prompts are not provided.
1. Press the key on the steering wheel
remote controller.
2. Once the icon changes into the
icon on the pop-up screen with a beep
sound, say "Voice setup." The "voice prompt
on" or "voice prompt off" can be directly
inputted if the current state is already
known.
5-4 VOICE COMMAND SYSTEM

Voice command Help

1. Press the key on the steering wheel
remote controller. A voice command win-
dow will be displayed on the lower side of
the screen followed by a "Command
please" system voice comment.
INFORMATION
The System voice comment "Command
Please" will not be provided when the Voice
prompt is turned OFF.
2. Once the icon changes into the
icon on the pop-up screen with a beep
sound, say "Help". If the proper Help menu
is already known, voice commands, such as
"destination help" can be inputted directly.
3. Once the icon changes into the icon on the
pop-up screen with a beep sound, say
"Voice Prompt on".
INFORMATION
In the Voice Setup Help screen, the com-
mands possible for input within the current
mode are displayed. For example, if the Voice
prompt is currently in Off state, then the com-
mand Voice prompt ON will be displayed on
the screen.
INFORMATION
The "help" command can be used even while
voice recognition dialogue is operating. At
such time, help instructions appropriate to
the state of the dialogue will be provided.
3. Say the name of the desired menu.
(ex : "Destination help")
4. Say the desired voice command.
VOICE COMMAND SYSTEM 5-3

Speaker adaptation

1. Press the key on the steering wheel
remote controller.
2. Once the icon changes into the icon
on the pop-up screen with a beep sound,
say "Voice setup." Or the "Speaker adapta-
tion" command can be directly inputted.
3. Once the icon changes into the
icon on the pop-up screen with a beep
sound, say "Speaker adaptation".