Connection ID
Input an ID of 1~ 8 hexadecimal characters [letters of the
alphabet (case sensitive) or numbers]. The Connection ID
cannot be left blank.
Wireless Setup
Transmit Range
To select the approximate distance between the
transmitter and receiver for an improved transmission link
(Km)
[Options: 1~10 kilometers].
Transmit Power
To select the transmit power level. [Options: 1, 2, 3, 4, 5].
(In normal use, set to 5. When testing, if the TX and RX
units are very close (10m), reduce TX Power to avoid
signal saturation).
PTZ RS485 Setup (refer to the settings on your PTZ controller)
*No matter RS485 Full or Half duplex system you have, Just connect your system
to proper lines(refer page 11~14) and you only need one set setting here in
MagicLink
Baud Rate
Options: 9600, 11.4K, 19.2K, 38.4K
Data Bit
Options: 7, 8
DeryTech Shepherd -
Wireless Surveillance Camera Transmission System
derytech
10 Kilometers
5 (maximum)
9600
8
User Guide | 26