System Setup And Configuration; Installing Magiclink - Derytech Shepherd User Manual

3. System Setup and Configuration

The Shepherd operates as a totally independent system and does not need to cooperate with other network systems.
Therefore, if all the Transmitter and Receiver default settings are to be used (for default settings, see Configuration
Settings on page 30), the system can be installed as a simple plug-and-play solution. However, we recommend that,
for security reasons, every Shepherd system is configured with its own unique security settings (using the MagicLink
software), and, if 2 or more Shepherd systems are used in a single area, it is vital that each be configured with its own
Data Encrypt Key and Connection ID.
To re-configure any of the default settings on the Shepherd, the MagicLink software should first be installed onto a
Windows-based PC or Notebook and then the system settings of the Transmitter and Receiver changed.

3.1 Installing MagicLink

MagicLink software allows users to re-configure the Shepherd via any Windows-based PC or Notebook. This section
describes how to install MagicLink to your PC.
1. Insert the MagicLink Installation CD-ROM into your computer's CD-ROM drive. Run the SETUP.EXE program
from the CD-ROM. The following window will appear:
DeryTech Shepherd -
Wireless Surveillance Camera Transmission System User Guide | 15