Configuring The Wtx5800 Transmitter And Wrx5800 Receiver; Re-Configuring The Wtx5800 Transmitter - Derytech Shepherd User Manual

3.2 Configuring the WTX5800 Transmitter and WRX5800 Receiver

Having installed MagicLink to your computer, follow the procedures below to re-configure the settings in both your
WTX5800 Transmitter and WRX5800 Receiver.

Re-configuring the WTX5800 Transmitter

1. Connect your computer to the Ethernet cable of the WTX5800 Transmitter.
Figure 3c
DeryTech Shepherd -
Wireless Surveillance Camera Transmission System User Guide | 18