Peripherals Connection - Hanin HT100 User Manual

3.3 Peripherals Connection

3.3.1 Interface Cable Connection
The standard for the printer's interface cable is below:
- USB B-Type cable
- RS-232C cable
- RJ45 cable
Please follow the graph instruction to connect the cable.
1. Make sure the printer is off.
2. Please plug in the cables
-Insert the USB B-Type cable into the interface.
-Insert the RS232 cable into the interface.
- Insert the RJ45 cable into the interface.
3.3.2 Bluetooth Connection
PDA with Bluetooth interface, laptop and other information terminals can drive the mobile
thermal printer HT100. Instructions as follows:
1. Power on printer.
2. Primary device search for outer Bluetooth devices.
3. If there are some outer Bluetooth devices, choose HT100.
4. Finish matching.
Detailed pairing methods, please refer to primary devices Bluetooth Names.
After pairing, primary devices with virtual Bluetooth interface (smart phone , pocket PC,
palm, notebook) can drive mobile thermal printer HT100 to printer through such virtual
Bluetooth interface.
Rev. 1.0
HT100 User Manual
17